How to integrate Outlook Mail (Office 365) using Microsoft Fabric

Integrate Microsoft Fabric and Outlook Mail (Office 365)
Integrate Microsoft Fabric and Outlook Mail (Office 365)

Learn how to quickly and efficiently connect Outlook Mail (Office 365) with Microsoft Fabric for smooth data access.

Read and write Microsoft Outlook Mail (Office 365) data effortlessly. Send, manage, and sync messages, attachments, and folders — almost no coding required. You can do it all using the high-performance Outlook Mail (Office 365) ODBC Driver (powered by Outlook Mail (Office 365) Connector for ZappySys API Driver). We'll walk you through the entire setup.

Ready to dive in? Download the product to jump right in, or follow the step-by-step guide below to see how it works.

Create data source using Outlook Mail (Office 365) ODBC Driver

Video instructions

Watch this quick walkthrough to see how to configure your Outlook Mail (Office 365) ODBC data source, or scroll down for the step-by-step written guide.

While this video uses the OData Connector as an example, the core concepts and setup process are exactly the same for the Outlook Mail (Office 365) Connector.

Step-by-step instructions

To get data from Outlook Mail (Office 365) using Microsoft Fabric, we first need to create an ODBC data source. We will later read this data in Microsoft Fabric. Perform these steps:

  1. Download and install ODBC PowerPack (if you haven't already).

  2. Search for odbc and open the ODBC Data Sources (64-bit):

    Open ODBC Data Source

  3. Create a User data source (User DSN) based on the ZappySys API Driver driver:

    ZappySys API Driver
    Create new User DSN for ZappySys API Driver
    • Create and use a User DSN if the client application runs under a User Account. This is the ideal option at design time (e.g., when developing in Visual Studio). Use it for both types of applications (64-bit and 32-bit).
    • Create and use a System DSN if the client application runs under a System Account (e.g., as a Windows Service). This is usually the required option in a production environment. If your Windows Service is a 32-bit application, you must use the 32-bit ODBC Data Source Administrator to configure this

  4. When the Configuration window appears give your data source a name if you haven't done that already, then select "Outlook Mail (Office 365)" from the list of Popular Connectors. If "Outlook Mail (Office 365)" is not present in the list, then click "Search Online" and download it. Then set the path to the location where you downloaded it. Finally, click Continue >> to proceed with configuring the DSN:

    OutlookMailOffice365DSN
    Outlook Mail (Office 365)
    ODBC DSN Template Selection

  5. Select your authentication scenario below to expand connection configuration steps to:

    • Configure the authentication in Outlook Mail (Office 365).
    • Enter those details into the ZappySys API Driver data source configuration.

    User Credentials

    Outlook Mail (Office 365) authentication

    Use delegated access (User Credentials) whenever you want to let a signed-in user work with their own resources or resources they can access. Whether it's an admin setting up policies for their entire organization or a user deleting an email in their inbox, all scenarios involving user actions should use delegated access. [API reference]

    Follow these simple steps below to create Microsoft Entra ID application with delegated access:

    WARNING: If you are planning to automate processes, we recommend that you use a Application Credentials authentication method. In case, you still need to use User Credentials, then make sure you use a system/generic account (e.g. automation@my-company.com). When you use a personal account which is tied to a specific employee profile and that employee leaves the company, the token may become invalid and any automated processes using that token will start to fail.
    1. Navigate to the Azure Portal and log in using your credentials.
    2. Access Microsoft Entra ID.
    3. Register a new application by going to App registrations and clicking on New registration button: Start new app registration in Microsoft Entra ID
      INFO: Find more information on how to register an application in Graph API reference.
    4. When configuration window opens, configure these fields:
      • Supported account type
        • Use Accounts in this organizational directory only, if you need access to data in your organization only.
      • Redirect URI:
        • Set the type to Public client/native (mobile & desktop).
        • Use https://zappysys.com/oauth as the URL.
      Register app in Microsoft Entra ID
    5. After registering the app, copy the Application (client) ID for later: Copy client ID of Microsoft Entra ID app
    6. Then copy OAuth authorization endpoint (v2) & OAuth token endpoint (v2) URLs to use later in the configuration: Copy Auth and Token URLs in Microsoft Entra ID app
    7. Now go to SSIS package or ODBC data source and use the copied values in User Credentials authentication configuration:
      • In the Authorization URL field paste the OAuth authorization endpoint (v2) URL value you copied in the previous step.
      • In the Token URL field paste the OAuth token endpoint (v2) URL value you copied in the previous step.
      • In the Client ID field paste the Application (client) ID value you copied in the previous step.
      • In the Scope field use the default value or select individual scopes, e.g.:
        • email
        • offline_access
        • openid
        • profile
        • Mail.Read
        • Mail.Read.Shared
        • Mail.ReadBasic
        • Mail.ReadBasic.Shared
        • Mail.ReadWrite
        • Mail.ReadWrite.Shared
        • Mail.Send
        • Mail.Send.Shared
        • User.Read
        • User.ReadBasic.All
        • Group.Read.All
    8. Press Generate Token button to generate Access and Refresh Tokens.
    9. Optional step. Choose Default User Id from the drop down menu (if someone shared a mailbox with you).
    10. Click Test Connection to confirm the connection is working.
    11. Done! Now you are ready to use the API Connector!
    API Connection Manager configuration

    Just perform these simple steps to finish authentication configuration:

    1. Set Authentication Type to User Credentials [OAuth]
    2. Optional step. Modify API Base URL if needed (in most cases default will work).
    3. Fill in all the required parameters and set optional parameters if needed.
    4. Press Generate Token button to generate the tokens.
    5. Finally, hit OK button:
    OutlookMailOffice365DSN
    Outlook Mail (Office 365)
    User Credentials [OAuth]
    https://graph.microsoft.com/v1.0
    Required Parameters
    Authorization URL Fill-in the parameter...
    Token URL Fill-in the parameter...
    Client ID Fill-in the parameter...
    Scope Fill-in the parameter...
    Return URL Fill-in the parameter...
    Optional Parameters
    Client Secret
    Refresh Token File Path
    Login Prompt Option
    Default User Id (Select after clicking **Generate Token**) me
    RetryMode RetryWhenStatusCodeMatch
    RetryStatusCodeList 429|503
    RetryCountMax 5
    RetryMultiplyWaitTime True
    ODBC DSN OAuth Connection Configuration
    Find full details in the Outlook Mail (Office 365) Connector authentication reference.

    Application Credentials

    Outlook Mail (Office 365) authentication

    Application-only access is broader and more powerful than delegated access (User Credentials), so you should only use app-only access where needed. Use it when: 1. The application needs to run in an automated way, without user input (for example, a daily script that checks emails from certain contacts and sends automated responses). 2. The application needs to access resources belonging to multiple different users (for example, a backup or data loss prevention app might need to retrieve messages from many different chat channels, each with different participants). 3. You find yourself tempted to store credentials locally and allow the app to sign in 'as' the user or admin. [API reference]

    Follow these simple steps below to create Microsoft Entra ID application with application access permissions.

    1. Navigate to the Azure Portal and log in using your credentials.
    2. Access Microsoft Entra ID.
    3. Register a new application by going to App registrations and clicking on New registration button: Start new app registration in Microsoft Entra ID
      INFO: Find more information on how to register an application in Graph API reference.
    4. When configuration window opens, configure these fields:
      • Supported account type
        • e.g. select Accounts in this organizational directory only if you need access to data in your organization only.
      • Redirect URI:
        • Set the type to Public client/native (mobile & desktop).
        • Leave the URL field empty.
      Register app in Microsoft Entra ID
    5. After registering the app, copy the Application (client) ID for later: Copy client ID of Microsoft Entra ID app
    6. Then copy OAuth authorization endpoint (v2) & OAuth token endpoint (v2) URLs: Copy Auth and Token URLs in Microsoft Entra ID app
    7. Continue and create Client secret: Add Client secret for Microsoft Entra ID app
    8. Then copy the Client secret for later steps: Copy Client secret
    9. Continue by adding permissions for the app by going to the API permissions section, and clicking on Add a permission: Start adding permissions to Microsoft Entra ID app
    10. Select Microsoft Graph: Select Graph API permissions for Microsoft Entra ID app
    11. Then choose Application permissions option: Select app permissions for Microsoft Entra ID app
    12. Continue by adding these Mail (Outlook) permissions: Select Outlook Mail application scopes
    13. Finish by clicking Add permissions button: Add permissions to Microsoft Entra ID app
    14. Now it's time to Grant admin consent for your application: Grant admin consent for Microsoft Entra ID app
    15. Confirm all the permissions are granted: Admin consent granted successfully in Entra ID
    16. Now go to SSIS package or ODBC data source and use the copied values in Application Credentials authentication configuration:
      • In the Token URL field paste the OAuth token endpoint (v2) URL value you copied in the previous step.
      • In the Client ID field paste the Application (client) ID value you copied in the previous step.
      • In the Client Secret field paste the Client secret value you copied in the previous step.
      • Choose Default User Id from the drop down menu.
    17. Click Test Connection to confirm the connection is working.
    18. That's it! Now you can use the connector.
    API Connection Manager configuration

    Just perform these simple steps to finish authentication configuration:

    1. Set Authentication Type to Application Credentials [OAuth]
    2. Optional step. Modify API Base URL if needed (in most cases default will work).
    3. Fill in all the required parameters and set optional parameters if needed.
    4. Finally, hit OK button:
    OutlookMailOffice365DSN
    Outlook Mail (Office 365)
    Application Credentials [OAuth]
    https://graph.microsoft.com/v1.0
    Required Parameters
    Token URL Fill-in the parameter...
    Client ID Fill-in the parameter...
    Client Secret Fill-in the parameter...
    Scope Fill-in the parameter...
    Default User Id Fill-in the parameter...
    Optional Parameters
    RetryMode RetryWhenStatusCodeMatch
    RetryStatusCodeList 429|503
    RetryCountMax 5
    RetryMultiplyWaitTime True
    ODBC DSN OAuth Connection Configuration
    Find full details in the Outlook Mail (Office 365) Connector authentication reference.

  6. Once the data source connection has been configured, it's time to configure the SQL query. Select the Preview tab and then click Query Builder button to configure the SQL query:

    ZappySys API Driver - Outlook Mail (Office 365)
    Read and write Microsoft Outlook Mail (Office 365) data effortlessly. Send, manage, and sync messages, attachments, and folders — almost no coding required.
    OutlookMailOffice365DSN
    Open Query Builder in API ODBC Driver to read and write data to REST API

  7. Start by selecting the Table or Endpoint you are interested in and then configure the parameters. This will generate a query that we will use in Microsoft Fabric to retrieve data from Outlook Mail (Office 365). Hit OK button to use this query in the next step. 

    SELECT * FROM MyMessages
    Configure table/endpoint parameters in ODBC data source based on API Driver
    Some parameters configured in this window will be passed to the Outlook Mail (Office 365) API, e.g. filtering parameters. It means that filtering will be done on the server side (instead of the client side), enabling you to get only the meaningful data much faster.

  8. Now hit Preview Data button to preview the data using the generated SQL query. If you are satisfied with the result, use this query in Microsoft Fabric:

    ZappySys API Driver - Outlook Mail (Office 365)
    Read and write Microsoft Outlook Mail (Office 365) data effortlessly. Send, manage, and sync messages, attachments, and folders — almost no coding required.
    OutlookMailOffice365DSN
    SELECT * FROM MyMessages
    API ODBC Driver-based data source data preview
    You can also access data quickly from the tables dropdown by selecting <Select table>.
    A WHERE clause, LIMIT keyword will be performed on the client side, meaning that the whole result set will be retrieved from the Outlook Mail (Office 365) API first, and only then the filtering will be applied to the data. If possible, it is recommended to use parameters in Query Builder to filter the data on the server side (in Outlook Mail (Office 365) servers).

  9. Click OK to finish creating the data source.

Install Microsoft On-premises data gateway (Standard mode)

To access and read Outlook Mail (Office 365) data in Microsoft Fabric, you must download and install the Microsoft On-premises data gateway (Standard mode). It acts as a secure bridge between Microsoft Fabric cloud services and your local Outlook Mail (Office 365) ODBC data source:

On-premises data gateway securely bridging ODBC data source and Microsoft Fabric

There are two types of On-premises data gateways:

Standard mode
  • Supports Power BI and other Microsoft Cloud services
  • Installs as a Windows service
  • Starts automatically
  • Supports centralized user access control
  • Supports the Direct Query feature
  • Ideal for enterprise solutions
Personal mode
  • Supports Power BI services only
  • Cannot run as a Windows service
  • Stops when you sign out of Windows
  • Does not support access control
  • Does not support the Direct Query feature
  • Best for individual use and POC solutions

You can download the On-premises data gateway directly from the Microsoft Fabric or Power BI portals:

Download Power BI On-premises data gateway
You must use the Standard mode of the gateway. Personal mode is not supported by Microsoft Fabric.

Link ODBC data source via the gateway

Follow these steps to download, install, and configure the gateway in Standard mode:

  1. Download On-premises data gateway (standard mode) and run the installer.

  2. Once the configuration window opens, sign in:

    Signing in to on-premises data gateway standard
    Sign in with the same email address you use for Microsoft Fabric.

  3. Select Register a new gateway on this computer (or migrate an existing one):

    Registering or migrating on-premises data gateway standard

  4. Name your gateway, enter a Recovery key, and click the Configure button:

    Naming on-premises data gateway standard
    Save your Recovery Key in a safe place (like a password manager). If you lose it, you cannot restore or migrate this gateway later.

  5. Once Microsoft gateway is installed, check if it registered correctly:

    • Go back to Microsoft Fabric portal

    • Click Gear icon on top-right

    • And then hit Manage connections and gateways menu item

    Manage On-premise data gateways in Microsoft Fabric or Power BI

  6. Continue by clicking the On-premises data gateway tab and selecting Standard mode gateways from the dropdown menu:

    Access On-premises data gateway list (Standard mode) in Microsoft Fabric

    If your gateway is not listed, the registration may have failed. To resolve this:

    • Wait a couple of minutes and refresh Microsoft Fabric portal page
    • Restart the machine where On-premises data gateway is installed
    • Check firewall settings

  7. Success! The gateway is now Online and ready to handle requests.

  8. Done!
Make sure to download and install Standard mode. The Personal mode gateway is not supported by Microsoft Fabric cloud services and will not work.

You are now ready to load data into Microsoft Fabric.

Load Outlook Mail (Office 365) data into Microsoft Fabric

Now that we have configured the ODBC data source and installed the On-premises data gateway, we can proceed with loading data. You can accomplish this in two ways:

  • Copy job
    Best for simple, high-speed data copying without modification.
  • Dataflow Gen2
    Best if you need to transform, clean, or reshape data before loading.

Let's dive into the steps for both methods.

Use Copy job for high-speed loading

  1. Go to the Microsoft Fabric Portal.

  2. Select an existing Workspace or create a new one by clicking New workspace (ensure you are in the Home section):

    Create a new workspace in Microsoft Fabric for a Copy job

  3. Inside your workspace, click the New item button in the toolbar to start creating your data pipeline:

    Create new item in Microsoft Fabric workspace

  4. In the item selection window, choose Copy job to open the data ingestion wizard:

    Add Copy job to Microsoft Fabric workspace

  5. In the Choose data source screen, search for odbc and select the Odbc source:

    Choose ODBC as the data source in Microsoft Fabric Copy job

  6. Then enter your ODBC connection string (DSN=OutlookMailOffice365DSN) and select MyGateway from the Data gateway dropdown we configured in the previous step:

    DSN=OutlookMailOffice365DSN
    DSN=OutlookMailOffice365DSN
    Configure ODBC connection string in Microsoft Fabric Copy job

  7. Select the table(s) and preview the data you wish to copy from Outlook Mail (Office 365). Once done, click Next:

    DSN=OutlookMailOffice365DSN
    Selecting tables to copy in Microsoft Fabric Copy Job

  8. Choose your Data Destination. You can create a New Fabric item (like a Lakehouse or Warehouse) or select an existing one:

    Choose data destination in Microsoft Fabric Copy job
    In this example, we will use a Lakehouse as the destination.

  9. Choose Full copy to load all data, or Incremental copy to load only changed data in subsequent runs:

    Select copy mode in Microsoft Fabric Copy job (Full vs Incremental)

  10. Review the Column and Table mappings section:

    Map source tables and columns to destination in Microsoft Fabric Copy job

  11. On the summary screen, review your settings. You can optionally enable Run on schedule. Click Save + Run to execute the job:

    DSN=OutlookMailOffice365DSN
    DSN=OutlookMailOffice365DSN
    Save and run the Copy job in Microsoft Fabric

  12. The job will enter the queue. Monitor the Status column to see the progress:

    DSN=OutlookMailOffice365DSN
    Monitor the status of the Microsoft Fabric Copy job

  13. Wait for the status to change to Succeeded. Your Outlook Mail (Office 365) data is now successfully integrated into Microsoft Fabric!

    Verify Microsoft Fabric Copy job success status

  14. Let's go to our Lakehouse (MyLakehouse) and verify the data:

    View loaded data in Microsoft Fabric Lakehouse

  15. Success! The data has been loaded.

Use Dataflow for advanced transformation

Another way to load data is by creating a Dataflow Gen2. This approach allows you to perform complex data transformations (ETL) before loading the data into its destination.

Configure Dataflow activity

  1. Go to the Microsoft Fabric Portal.

  2. Inside your workspace, click New item and select Dataflow Gen2:

    Create Dataflow Gen2 in Microsoft Fabric

  3. In the Power Query editor, click Get data from another source:

    Get data from ODBC source in Dataflow

  4. Search for ODBC in the search bar and select the ODBC connector:

    Choose ODBC data source in Dataflow

  5. Then in the next step follow these instructions:

    • Enter your ODBC connection string (e.g., DSN=OutlookMailOffice365DSN)
    • Expand Advanced options
    • Enter your SQL statement
    • Select your On-premises data gateway
    • Finally, click Next:
    DSN=OutlookMailOffice365DSN
    DSN=OutlookMailOffice365DSN
    SELECT * FROM MyMessages
    Configure ODBC data source in Dataflow

  6. You will see a preview of your Outlook Mail (Office 365) data. You can now transform the data if needed (filter rows, rename columns, change types, etc.):

    Odbc.Query("DSN=OutlookMailOffice365DSN", "SELECT * FROM MyMessages")
    Source data preview in Dataflow

  7. Now, let's send this data to the Lakehouse. Click the + button (Add data destination) at the bottom right and select Lakehouse:

    Odbc.Query("DSN=OutlookMailOffice365DSN", "SELECT * FROM MyMessages")
    Add destination in Dataflow

  8. Configure the destination connection settings and click Next:

    Configure destination in Dataflow

  9. Select your specific Lakehouse, enter the Table name you want to create, and click Next:

    Configure destination target in Dataflow

  10. Uncheck Use automatic settings to set data update or schema options manually. Map the columns with proper data types and click Save settings when done:

    Set column mappings in destination in Dataflow

  11. The destination is now set. Click the Publish button to save the Dataflow:

    Odbc.Query("DSN=OutlookMailOffice365DSN", "SELECT * FROM MyMessages")
    Ready to publish Dataflow

  12. Done! You can now start building reports using your new semantic model.

Configure and run Pipeline

Once you have created and published your Dataflow, you can use a Pipeline to orchestrate and run it.

  1. Go to the Microsoft Fabric Portal.

  2. Inside your workspace, click New item and select Data Pipeline to create a new pipeline.

    Create Pipeline in Microsoft Fabric

  3. In the pipeline editor, select the Dataflow activity from the toolbar to add it to your canvas:

    Add Dataflow activity to pipeline

  4. Select the Dataflow activity on the canvas and click the Settings tab. Choose your Workspace and the Dataflow you created in the previous steps:

    Configure Dataflow activity settings in pipeline

  5. You are now ready to link the Dataflow with other Pipeline activities.

  6. Once the Pipeline flow is configured, click the Run button at the top, then click Save and run to execute the pipeline:

    Save and run pipeline

  7. Monitor the Output tab below. The Pipeline status will initially show as In progress:

    Pipeline run in progress status

  8. Wait for the process to complete. The status will update to Succeeded, indicating your data has been successfully loaded via the Dataflow:

    Pipeline run succeeded status

  9. Done! You can now start building reports on your new semantic model.

Optional: Centralized data access via ZappySys Data Gateway

In some situations, you may need to provide Outlook Mail (Office 365) data access to multiple users or services. Configuring the data source on a Data Gateway creates a single, centralized connection point for this purpose.

This configuration provides two primary advantages:

  • Centralized data access
    The data source is configured once on the gateway, eliminating the need to set it up individually on each user's machine or application. This significantly simplifies the management process.
  • Centralized access control
    Since all connections route through the gateway, access can be governed or revoked from a single location for all users.
Data Gateway
Local ODBC
data source
Simple configuration
Installation Single machine Per machine
Connectivity Local and remote Local only
Connections limit Limited by License Unlimited
Central data access
Central access control
More flexible cost

To achieve this, you must first create a data source in the Data Gateway (server-side) and then create an ODBC data source in Microsoft Fabric (client-side) to connect to it.

Let's not wait and get going!

Create Outlook Mail (Office 365) data source in the gateway

In this section we will create a data source for Outlook Mail (Office 365) in the Data Gateway. Let's follow these steps to accomplish that:

  1. Search for gateway in the Windows Start Menu and open ZappySys Data Gateway Configuration:

    Open ZappySys Data Gateway Service Manager

  2. Go to the Users tab and follow these steps to add a Data Gateway user:

    • Click the Add button
    • In the Login field enter a username, e.g., john
    • Then enter a Password
    • Check the Is Administrator checkbox
    • Click OK to save
    Data Gateway - Add User

  3. Now we are ready to add a data source:

    • Click the Add button
    • Give the Data source a name (have it handy for later)
    • Then select Native - ZappySys API Driver
    • Finally, click OK
    OutlookMailOffice365DSN
    ZappySys API Driver
    Data Gateway - Add data source

  4. When the ZappySys API Driver configuration window opens, go back to ODBC Data Source Administrator where you already have the Outlook Mail (Office 365) ODBC data source created and configured, and follow these steps on how to Import data source configuration into the Gateway:

    • Open ODBC data source configuration and click Copy settings:
      ZappySys API Driver - Configuration [Version: 2.0.1.10418]
      ZappySys API Driver - Outlook Mail (Office 365)
      Read and write Microsoft Outlook Mail (Office 365) data effortlessly. Send, manage, and sync messages, attachments, and folders — almost no coding required.
      OutlookMailOffice365DSN
      Copy connection string for ODBC application
    • The window opens, telling us the connection string was successfully copied to the clipboard: Successful connection string copying for ODBC application

    • Then go to Data Gateway configuration and in data source configuration window click Load settings:

      OutlookMailOffice365DSN
      ZappySys API Driver - Configuration [Version: 2.0.1.10418]
      ZappySys API Driver - Outlook Mail (Office 365)
      Read and write Microsoft Outlook Mail (Office 365) data effortlessly. Send, manage, and sync messages, attachments, and folders — almost no coding required.
      OutlookMailOffice365DSN
      Load configuration in ZappySys Data Gateway data source
    • Once a window opens, just paste the settings by pressing CTRL+V or by clicking right mouse button and then Paste option.

  5. Once done, go to the Network Settings tab and Add a firewall rule for inbound traffic:

    Data Gateway - Add firewall rule for inbound connections
    • This will initially allow all inbound traffic.
    • Click Edit IP filters to restrict access to specific IP addresses or ranges.

  6. Crucial Step: After creating or modifying the data source, you must:

    • Click the Save button to persist your changes.
    • Hit Yes when prompted to restart the Data Gateway service.

    This ensures all changes are properly applied:

    ZappySys Data Gateway - Save Changes
    Skipping this step may cause the new settings to fail, preventing you from connecting to the data source.

Create ODBC data source to connect to the gateway

In this part we will create an ODBC data source to connect to the ZappySys Data Gateway from Microsoft Fabric. To achieve that, let's perform these steps:

  1. Search for odbc and open the ODBC Data Sources (64-bit):

    Open ODBC Data Source

  2. Create a User data source (User DSN) based on the ODBC Driver 17 for SQL Server driver:

    ODBC Driver 17 for SQL Server
    Create new User DSN for ODBC Driver 17 for SQL Server
    If you don't see the ODBC Driver 17 for SQL Server driver in the list, choose a similar version.

  3. Then set a Name for the data source (e.g. Gateway) and the address of the Data Gateway:

    ZappySysGatewayDSN
    localhost,5000
    ODBC driver for SQL Server - Setting hostname and port
    Make sure you separate the hostname and port with a comma, e.g. localhost,5000.

  4. Proceed with the authentication part:

    • Select SQL Server authentication
    • In the Login ID field enter the user name you created in the Data Gateway, e.g., john
    • Set Password to the one you configured in the Data Gateway
    ODBC driver for SQL Server - Selecting SQL Authentication

  5. Then set the default database property to OutlookMailOffice365DSN (the one we used in the Data Gateway):

    OutlookMailOffice365DSN
    OutlookMailOffice365DSN
    ODBC driver for SQL Server - Selecting database
    Make sure to type the data source name manually or copy/paste it directly into the field. Using the dropdown might fail because the Trust server certificate option is not enabled yet (next step).

  6. Continue by checking the Trust server certificate option:

    ODBC driver for SQL Server - Trusting certificate

  7. Once you do that, test the connection:

    ODBC driver for SQL Server - Testing connection

  8. If the connection is successful, everything is good:

    ODBC driver for SQL Server - Testing connection succeeded

  9. Done!

We are ready to move to the final step. Let's do it!

Access data in Microsoft Fabric via the gateway

Finally, we are ready to read data from Outlook Mail (Office 365) in Microsoft Fabric via the Data Gateway. Follow these final steps:

  1. Go back to Microsoft Fabric.

  2. Then, go to your Copy job or Dataflow and start configuring your ODBC data source (like you did in the previous step).

  3. In the ODBC configuration window, configure these fields:

    • Enter your ODBC connection string (DSN format), for example: DSN=ZappySysGatewayDSN
    • Expand Advanced options and set the SQL statement
    • Select MyGateway from the Data gateway dropdown that you configured in the previous step
    • Select Basic from the Authentication kind dropdown
    • Enter the Username (e.g., john) and Password that you configured in ZappySys Data Gateway
    DSN=ZappySysGatewayDSN
    SELECT * FROM MyMessages
    DSN=ZappySysGatewayDSN
    Configure access to ZappySys Data Gateway data source in Microsoft Fabric

  4. Read the data the same way we discussed at the beginning of this article.

  5. That's it!

Now you can connect to Outlook Mail (Office 365) data in Microsoft Fabric via the Data Gateway.

Supported Outlook Mail (Office 365) Connector actions

Got a specific use case in mind? We've mapped out exactly how to perform a variety of essential Outlook Mail (Office 365) operations directly in Microsoft Fabric, so you don't have to figure out the setup from scratch. Check out the step-by-step guides below:

Conclusion

In this article we showed you how to connect to Outlook Mail (Office 365) in Microsoft Fabric and integrate data without writing complex code — all of this was powered by Outlook Mail (Office 365) ODBC Driver.

Download ODBC PowerPack now or ping us via chat if you have any questions or are looking for a specific feature (you can also reach out to us by submitting a ticket):

Download Chat

Explore Microsoft Fabric connectors

All
Big Data & NoSQL
Database
CRM & ERP
Marketing
Collaboration
Cloud Storage
Reporting
Commerce
API & Files

More Outlook Mail (Office 365) integrations

All
Data Integration
Database
BI & Reporting
Productivity
Programming Languages
Automation & Scripting
ODBC applications