How to integrate Power BI using Azure Data Factory (Pipeline)

Integrate Azure Data Factory (Pipeline) and Power BI

Learn how to quickly and efficiently connect Power BI with Azure Data Factory (Pipeline) for smooth data access.

Read and write Microsoft Power BI data effortlessly. Access, refresh, and manage datasets, reports, and dashboards — almost no coding required. You can do it all using the high-performance Power BI ODBC Driver for Azure Data Factory (Pipeline) (often referred to as the Power BI Connector). We'll walk you through the entire setup.

Ready to dive in? Download the product to jump right in, or follow the step-by-step guide below to see how it works.

Power BI ODBC Driver Powering this integration

High performance
Bidirectional
Low-code / No-code
Easy to use

Built on the ZappySys API Driver, the Power BI ODBC Driver is a high-performance, low-code / no-code solution. It enables you to connect to Power BI data without any coding right in your SQL Server, or any ODBC/JDBC application. Part of the ODBC PowerPack.

Documentation

Create data source using Power BI ODBC Driver

Step-by-step instructions

To get data from Power BI using Azure Data Factory (Pipeline), we first need to create an ODBC data source. We will later read this data in Azure Data Factory (Pipeline). Perform these steps:

Download and install ODBC PowerPack (if you haven't already).
Search for odbc and open the ODBC Data Sources (64-bit):
Create a User data source (User DSN) based on the ZappySys API Driver driver:

ZappySys API Driver
- Create and use a User DSN if the client application runs under a User Account. This is the ideal option at design time (e.g., when developing in Visual Studio). Use it for both types of applications (64-bit and 32-bit).
- Create and use a System DSN if the client application runs under a System Account (e.g., as a Windows Service). This is usually the required option in a production environment. If your Windows Service is a 32-bit application, you must use the 32-bit ODBC Data Source Administrator to configure this
When deployed to production, Azure Data Factory (Pipeline) runs under a Service Account. Therefore, for the production environment, you must create and use a System DSN.
When the Configuration window appears give your data source a name if you haven't done that already, then select "Power BI" from the list of Popular Connectors. If "Power BI" is not present in the list, then click "Search Online" and download it. Then set the path to the location where you downloaded it. Finally, click Continue >> to proceed with configuring the DSN:

PowerBiDSN

Power BI

Now it's time to configure the Connection Manager. Select Authentication Type, e.g. Token Authentication. Then select API Base URL (in most cases, the default one is the right one). More info is available in the Authentication section.

User Credentials

Power BI authentication

Use delegated access (User Credentials) whenever you want to let a signed-in user work with their own resources or resources they can access. Whether it's an admin setting up policies for their entire organization or a user deleting an email in their inbox, all scenarios involving user actions should use delegated access. [API reference]

Follow these simple steps below to create Microsoft Entra ID application with delegated access:

WARNING: If you are planning to automate processes, we recommend that you use a Application Credentials authentication method. In case, you still need to use User Credentials, then make sure you use a system/generic account (e.g. automation@my-company.com). When you use a personal account which is tied to a specific employee profile and that employee leaves the company, the token may become invalid and any automated processes using that token will start to fail.

Navigate to the Azure Portal and log in using your credentials.
Access Microsoft Entra ID.
Register a new application by going to App registrations and clicking on New registration button:

INFO: Find more information on how to register an application in Graph API reference.
When configuration window opens, configure these fields:
- Supported account type
  - Use Accounts in this organizational directory only, if you need access to data in your organization only.
- Redirect URI:
  - Set the type to Public client/native (mobile & desktop).
  - Use https://zappysys.com/oauth as the URL.
After registering the app, copy the Application (client) ID for later:
Copy OAuth authorization endpoint (v2) & OAuth token endpoint (v2) URLs to use later in the configuration:
Now go to SSIS package or ODBC data source and use the copied values in User Credentials authentication configuration:
- In the Authorization URL field paste the OAuth authorization endpoint (v2) URL value you copied in the previous step.
- In the Token URL field paste the OAuth token endpoint (v2) URL value you copied in the previous step.
- In the Client ID field paste the Application (client) ID value you copied in the previous step.
- In the Scope field use the default value or select individual scopes, e.g.:
  - offline_access
  - https://analysis.windows.net/powerbi/api/Workspace.Read.All
  - https://analysis.windows.net/powerbi/api/Dataset.Read.All
  - https://analysis.windows.net/powerbi/api/Dataset.ReadWrite.All
Press Generate Token button to generate Access and Refresh Tokens.
Click Test Connection to confirm the connection is working.
Optional step. Choose Default Workspace from the drop down menu.
Choose Default Dataset from the drop down menu.
Done! Now you are ready to use the API Connector!

API Connection Manager configuration

Just perform these simple steps to finish authentication configuration:

Set Authentication Type to User Credentials [OAuth]
Optional step. Modify API Base URL if needed (in most cases default will work).
Fill in all the required parameters and set optional parameters if needed.
Press Generate Token button to generate the tokens.
Finally, hit OK button:

PowerBiDSN

Power BI

User Credentials [OAuth]

https://api.powerbi.com/v1.0/myorg

Required Parameters
Authorization URL	Fill-in the parameter...
Token URL	Fill-in the parameter...
Client ID	Fill-in the parameter...
Scope	Fill-in the parameter...
Default Dataset (select after generating tokens)	Fill-in the parameter...
Optional Parameters
Client Secret
Redirect URI (must match App Redirect URI)
Default Workspace (Keep Empty for My Workspace - select after generating tokens)
RetryMode	RetryWhenStatusCodeMatch
RetryStatusCodeList	429\|503
RetryCountMax	20
RetryWaitTimeMs	1000
RetryMultiplyWaitTime	True
Login options

Once the data source connection has been configured, it's time to configure the SQL query. Select the Preview tab and then click Query Builder button to configure the SQL query:

ZappySys API Driver - Power BI

Read and write Microsoft Power BI data effortlessly. Access, refresh, and manage datasets, reports, and dashboards — almost no coding required.

PowerBiDSN
Start by selecting the Table or Endpoint you are interested in and then configure the parameters. This will generate a query that we will use in Azure Data Factory (Pipeline) to retrieve data from Power BI. Hit OK button to use this query in the next step.
```
SELECT * 
FROM Workspaces
WHERE Id='aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeeeee'
```
Some parameters configured in this window will be passed to the Power BI API, e.g. filtering parameters. It means that filtering will be done on the server side (instead of the client side), enabling you to get only the meaningful data much faster.
Now hit Preview Data button to preview the data using the generated SQL query. If you are satisfied with the result, use this query in Azure Data Factory (Pipeline):
ZappySys API Driver - Power BI

Read and write Microsoft Power BI data effortlessly. Access, refresh, and manage datasets, reports, and dashboards — almost no coding required.

PowerBiDSN
```
SELECT * 
FROM Workspaces
WHERE Id='aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeeeee'
```
You can also access data quickly from the tables dropdown by selecting <Select table>.

A WHERE clause, LIMIT keyword will be performed on the client side, meaning that the whole result set will be retrieved from the Power BI API first, and only then the filtering will be applied to the data. If possible, it is recommended to use parameters in Query Builder to filter the data on the server side (in Power BI servers).
Click OK to finish creating the data source.

Video Tutorial

Read data in Azure Data Factory (ADF) from ODBC datasource (Power BI)

Sign in to Azure Portal
- Open your browser and go to: https://portal.azure.com
- Enter your Azure credentials and complete MFA if required.
- After login, go to Data factories.
Under Azure Data Factory Resource - Create or select the Data Factory you want to work with.
Inside the Data Factory resource page, click Launch studio.
Create a New Integration Runtime (Self-Hosted):
- In Azure Data Factory Studio, go to the Manage section (left menu).
- Under Connections, select Integration runtimes.
- Click + New to create a new integration runtime.
Select Azure, Self-Hosted option:
Select Self-Hosted option:
Set a name, we will use OnPremisesRuntime:
Download and install Microsoft Integration Runtime.
Launch Integration Runtime and copy/paste Authentication Key from Integration Runtime configuration in Azure Portal:
After finishing registering the Integration Runtime node, you should see a similar view:
Go back to Azure Portal and finish adding new Integration Runtime. You should see it was successfully added:
Create a New Linked service:
- In the Manage section (left menu).
- Under Connections, select Linked services.
- Click + New to create a new Linked service based on ODBC.
Select ODBC service:
Configure new ODBC service. Use the same DSN name we used in the previous step and copy it to Connection string box:

PowerBiDSN

DSN=PowerBiDSN
For created ODBC service create ODBC-based dataset:
Go to your pipeline and add Copy data connector into the flow. In Source section use OdbcDataset we created as a source dataset:
Then go to Sink section and select a destination/sink dataset. In this example we use precreated AzureBlobStorageDataset which saves data into an Azure Blob:
Finally, run the pipeline and see data being transferred from OdbcDataset to your destination dataset:

Executing SQL queries using Lookup activity

If you need to execute commands in Power BI instead of retrieving data, use the Lookup activity for that purpose. Use this approach when you want data to be changed on the Power BI side, but you don't need the data on your side (a "fire-and-forget" scenario).

Perform these simple steps to accomplish that:

Go to your pipeline in Azure Data Factory
Find Lookup activity in the Activities pane
Then drag-and-drop the Lookup activity onto your pipeline canvas
Click Settings tab
Select OdbcDataset in the Source dataset field
Finally, enter your SQL query in the Query text box:

SELECT * FROM create_push_dataset WITH ( "Definition" = 'abcd-1234-definition' )

Configuring Lookup activity in ADF pipeline to perform a command in Power BI

Optional: Centralized data access via ZappySys Data Gateway

In some situations, you may need to provide Power BI data access to multiple users or services. Configuring the data source on a Data Gateway creates a single, centralized connection point for this purpose.

This configuration provides two primary advantages:

Centralized data access
The data source is configured once on the gateway, eliminating the need to set it up individually on each user's machine or application. This significantly simplifies the management process.
Centralized access control
Since all connections route through the gateway, access can be governed or revoked from a single location for all users.

	Data Gateway	Local ODBC data source
Simple configuration
Installation	Single machine	Per machine
Connectivity	Local and remote	Local only
Connections limit	Limited by License	Unlimited
Central data access
Central access control
More flexible cost

To achieve this, you must first create a data source in the Data Gateway (server-side) and then create an ODBC data source in Azure Data Factory (Pipeline) (client-side) to connect to it.

Let's not wait and get going!

Create Power BI data source in the gateway

In this section we will create a data source for Power BI in the Data Gateway. Let's follow these steps to accomplish that:

Search for gateway in the Windows Start Menu and open ZappySys Data Gateway Configuration:
Go to the Users tab and follow these steps to add a Data Gateway user:
- Click the Add button
- In the Login field enter a username, e.g., john
- Then enter a Password
- Check the Is Administrator checkbox
- Click OK to save
Now we are ready to add a data source:
- Click the Add button
- Give the Data source a name (have it handy for later)
- Then select Native - ZappySys API Driver
- Finally, click OK
PowerBiDSN

ZappySys API Driver
When the ZappySys API Driver configuration window opens, go back to ODBC Data Source Administrator where you already have the Power BI ODBC data source created and configured, and follow these steps on how to Import data source configuration into the Gateway:
- Open ODBC data source configuration and click Copy settings:
  
  ZappySys API Driver - Configuration [Version: 2.0.1.10418]
  
  ZappySys API Driver - Power BI
  
  Read and write Microsoft Power BI data effortlessly. Access, refresh, and manage datasets, reports, and dashboards — almost no coding required.
  
  PowerBiDSN
- The window opens, telling us the connection string was successfully copied to the clipboard:
- Then go to Data Gateway configuration and in data source configuration window click Load settings:
  
  PowerBiDSN
  
  ZappySys API Driver - Configuration [Version: 2.0.1.10418]
  
  ZappySys API Driver - Power BI
  
  Read and write Microsoft Power BI data effortlessly. Access, refresh, and manage datasets, reports, and dashboards — almost no coding required.
  
  PowerBiDSN
- Once a window opens, just paste the settings by pressing CTRL+V or by clicking right mouse button and then Paste option.
Once done, go to the Network Settings tab and Add a firewall rule for inbound traffic:
- This will initially allow all inbound traffic.
- Click Edit IP filters to restrict access to specific IP addresses or ranges.
Crucial Step: After creating or modifying the data source, you must:
- Click the Save button to persist your changes.
- Hit Yes when prompted to restart the Data Gateway service.
This ensures all changes are properly applied:

Skipping this step may cause the new settings to fail, preventing you from connecting to the data source.

Create ODBC data source to connect to the gateway

In this part we will create an ODBC data source to connect to the ZappySys Data Gateway from Azure Data Factory (Pipeline). To achieve that, let's perform these steps:

Search for odbc and open the ODBC Data Sources (64-bit):
Create a User data source (User DSN) based on the ODBC Driver 17 for SQL Server driver:

ODBC Driver 17 for SQL Server

If you don't see the ODBC Driver 17 for SQL Server driver in the list, choose a similar version.
Then set a Name for the data source (e.g. Gateway) and the address of the Data Gateway:

ZappySysGatewayDSN

localhost,5000

Make sure you separate the hostname and port with a comma, e.g. localhost,5000.
Proceed with the authentication part:
- Select SQL Server authentication
- In the Login ID field enter the user name you created in the Data Gateway, e.g., john
- Set Password to the one you configured in the Data Gateway
Then set the default database property to PowerBiDSN (the one we used in the Data Gateway):

PowerBiDSN

PowerBiDSN

Make sure to type the data source name manually or copy/paste it directly into the field. Using the dropdown might fail because the Trust server certificate option is not enabled yet (next step).
Continue by checking the Trust server certificate option:
Once you do that, test the connection:
If the connection is successful, everything is good:
Done!

We are ready to move to the final step. Let's do it!

Access data in Azure Data Factory (Pipeline) via the gateway

Finally, we are ready to read data from Power BI in Azure Data Factory (Pipeline) via the Data Gateway. Follow these final steps:

Go back to Azure Data Factory (Pipeline).
Create a New Linked service:
- In the Manage section (left menu).
- Under Connections, select Linked services.
- Click + New to create a new Linked service based on ODBC.
Select ODBC service:
Configure new ODBC service. Use the same DSN name we used in the previous step and copy it to Connection string box:

ZappySysGatewayDSN

DSN=ZappySysGatewayDSN
Read the data the same way we discussed at the beginning of this article.
That's it!

Now you can connect to Power BI data in Azure Data Factory (Pipeline) via the Data Gateway.

If you are asked for authentication details, use Database authentication, SQL authentication or Basic authentication option and enter the credentials you used when configuring the Data Gateway, e.g. john and your password.

Supported Power BI Connector actions

Got a specific use case in mind? We've mapped out exactly how to perform a variety of essential Power BI operations directly in Azure Data Factory (Pipeline), so you don't have to figure out the setup from scratch. Check out the step-by-step guides below:

Conclusion

In this article we showed you how to connect to Power BI in Azure Data Factory (Pipeline) and integrate data without writing complex code — all of this was powered by Power BI ODBC Driver.

Download ODBC PowerPack now or ping us via chat if you have any questions or are looking for a specific feature (you can also reach out to us by submitting a ticket):

Download Chat