How to integrate MySQL using Alteryx

Learn how to quickly and efficiently connect MySQL with Alteryx for smooth data access.

Read and write MySQL data effortlessly. Query, sync, and manage databases and tables — almost no coding required. You can do it all using the high-performance MySQL ODBC Driver for Alteryx (often referred to as the MySQL Connector). We'll walk you through the entire setup.

Ready to dive in? Download the product to jump right in, or follow the step-by-step guide below to see how it works.

MySQL ODBC Driver Powering this integration

High performance
Bidirectional
Low-code / No-code
Easy to use

Built on the ZappySys JDBC Bridge Driver, the MySQL ODBC Driver is a high-performance, low-code / no-code solution. It enables you to connect to MySQL data without any coding right in your SQL Server, or any ODBC/JDBC application. Part of the ODBC PowerPack.

Documentation

Prerequisites

Before we begin, make sure you meet the following prerequisite: Java Runtime Environment (JRE) or Java Development Kit (JDK) must be installed on your system.

Minimum required version: Java 8
- Amazon Corretto 8
- Oracle JRE 8
Recommended Java version: Java 21
- Amazon Corretto 21
- Oracle JRE 21

If your JDBC Driver targets a different Java version (e.g., 11 / 17 / 21), install the corresponding or newer Java version.

If you already have a JRE installed, you can try using it too. However, if you experience any issues, we recommend using one of the distributions mentioned above (you can install an additional JRE next to the existing one; just don't forget to configure the default Java in the Windows Environment Variables).

Download MySQL JDBC driver

To connect to MySQL in , you will have to download JDBC driver for it, which we will use in later steps. Let's perform these little steps right away:

Visit MySQL website or MVN Repository.
Download the JDBC driver, and save it locally, e.g. to D:\Drivers\JDBC\mysql-connector-j.jar.
Done! That was easy, wasn't it? Let's proceed to the next step.

Create data source using MySQL ODBC Driver

Step-by-step instructions

To get data from MySQL using Alteryx, we first need to create an ODBC data source. We will later read this data in Alteryx. Perform these steps:

Download and install ODBC PowerPack (if you haven't already).
Search for odbc and open the ODBC Data Sources (64-bit):
Create a User data source (User DSN) based on the ZappySys JDBC Bridge Driver driver:

ZappySys JDBC Bridge Driver
- Create and use a User DSN if the client application runs under a User Account. This is the ideal option at design time (e.g., when developing in Visual Studio). Use it for both types of applications (64-bit and 32-bit).
- Create and use a System DSN if the client application runs under a System Account (e.g., as a Windows Service). This is usually the required option in a production environment. If your Windows Service is a 32-bit application, you must use the 32-bit ODBC Data Source Administrator to configure this
Now, we need to configure the JDBC connection in the new ODBC data source. Simply enter the Connection string, credentials, configure other settings, and then click Test Connection button to test the connection:

MysqlDSN

jdbc:mysql://mysql-instance-host-name:3306/MyDatabase

D:\Drivers\JDBC\mysql-connector-j.jar

root

****************

[]

Use these values when setting parameters:
- Connection string: jdbc:mysql://mysql-instance-host-name:3306/MyDatabase
- JDBC driver file(s): D:\Drivers\JDBC\mysql-connector-j.jar
- User name: root
- User password: ****************
- Connection parameters: []
You should see a message saying that connection test is successful:

Otherwise, if you are getting an error, check out our Community for troubleshooting tips.
We are at the point where we can preview a SQL query. For more SQL query examples visit JDBC Bridge documentation:
MysqlDSN
```
SELECT * FROM `orders`
```
```
SELECT * FROM `orders`
```
You can also click on the <Select Table> dropdown and select a table from the list.

The ZappySys JDBC Bridge Driver acts as a transparent intermediary, passing SQL queries directly to the JDBC driver, which then handles the query execution. This means the Bridge Driver simply relays the SQL query without altering it.

Some JDBC drivers don't support INSERT/UPDATE/DELETE statements, so you may get an error saying "action is not supported" or a similar one. Please, be aware, this is not the limitation of ZappySys JDBC Bridge Driver, but is a limitation of the specific JDBC driver you are using.
Click OK to finish creating the data source.

Video Tutorial

Read MySQL data in Alteryx Designer (workstation)

Here we will be reading MySQL data on your workstation using Alteryx Designer. Follow the steps below to connect via ODBC and run your workflow locally.

Version requirement: Alteryx support was added in ODBC PowerPack v2.2.1. You must have ODBC PowerPack v2.2.1 or higher installed. How to check version of my ODBC PowerPack.

Open Alteryx Designer.
First, verify your DCM Settings to ensure you can access ODBC drivers. Go to Options > User Settings > Edit User Settings.

If DCM Mode is set to DCM Only, change it to DCM Optional if you would like to access the legacy Generic ODBC Connection.

After changing this setting, you may need to click Save and restart the connection window for the "Generic ODBC" icon to appear.
Drag an Input Data tool onto your Alteryx canvas.
In the Configuration pane, click Set Up a Connection.
Note for DCM Users: If your environment has DCM (Data Connection Manager) enabled, the classic "Generic ODBC" icon may be hidden. To find it, select Data sources on the left and type "ODBC" in the search bar.
Once the ODBC window opens, click Connect Asset and select your MysqlDSN DSN from the list.

Ensure you have configured a 64-bit System DSN in the Windows ODBC Data Source Administrator before this step.
After selecting your DSN, configure your SQL Query in the Input Data tool configuration:
To save your data, drag an Output Data tool and connect it to the Input Data tool.
Configure the Output Data tool to write to a CSV file:
Press Run (Ctrl+R) to execute the workflow. Verify the results in the Results Window at the bottom.

Using DSN-less Connection String

If you prefer to use a DSN-less connection string instead of creating an ODBC data source in Alteryx, you can enter the connection string directly in the Input Data tool's connection setup:

Deploy workflow and run on server (e.g. Alteryx Server)

To run your Alteryx workflow on a server (e.g. Alteryx Server or a machine used for scheduled runs), install ZappySys ODBC PowerPack and configure the same DSN on that server so the workflow can connect to MySQL data.

On the server where the workflow will run, download and install ODBC PowerPack (v2.2.1 or higher for Alteryx support).
Open ODBC Data Sources (64-bit) on the server and create a System DSN with the same name and settings as on your workstation (use the same driver and connection configuration). An easy way to copy your workstation DSN settings to the server is described in How to copy ODBC DSN or Data Gateway settings to another server (use Copy Settings on the workstation, then Load settings on the server).
Deploy or publish your workflow to the server (e.g. upload to Alteryx Server or copy the workflow to the server).
Run the workflow on the server; it will use the DSN you created in step 2 to connect to MySQL.

Optional: Centralized data access via ZappySys Data Gateway

In some situations, you may need to provide MySQL data access to multiple users or services. Configuring the data source on a Data Gateway creates a single, centralized connection point for this purpose.

This configuration provides two primary advantages:

Centralized data access
The data source is configured once on the gateway, eliminating the need to set it up individually on each user's machine or application. This significantly simplifies the management process.
Centralized access control
Since all connections route through the gateway, access can be governed or revoked from a single location for all users.

	Data Gateway	Local ODBC data source
Simple configuration
Installation	Single machine	Per machine
Connectivity	Local and remote	Local only
Connections limit	Limited by License	Unlimited
Central data access
Central access control
More flexible cost

To achieve this, you must first create a data source in the Data Gateway (server-side) and then create an ODBC data source in Alteryx (client-side) to connect to it.

Let's not wait and get going!

Create MySQL data source in the gateway

In this section we will create a data source for MySQL in the Data Gateway. Let's follow these steps to accomplish that:

Search for gateway in the Windows Start Menu and open ZappySys Data Gateway Configuration:
Go to the Users tab and follow these steps to add a Data Gateway user:
- Click the Add button
- In the Login field enter a username, e.g., john
- Then enter a Password
- Check the Is Administrator checkbox
- Click OK to save
Now we are ready to add a data source:
- Click the Add button
- Give the Data source a name (have it handy for later)
- Then select Native - ZappySys JDBC Bridge Driver
- Finally, click OK
MysqlDSN

ZappySys JDBC Bridge Driver
When the ZappySys JDBC Bridge Driver configuration window opens, go back to ODBC Data Source Administrator where you already have the MySQL ODBC data source created and configured, and follow these steps on how to Import data source configuration into the Gateway:
- Open ODBC data source configuration and click Copy settings:
  
  ZappySys JDBC Bridge Driver - Configuration [Version: 2.0.1.10418]
  
  ZappySys JDBC Bridge Driver - MySQL
  
  Read and write MySQL data effortlessly. Query, sync, and manage databases and tables — almost no coding required.
  
  MysqlDSN
- The window opens, telling us the connection string was successfully copied to the clipboard:
- Then go to Data Gateway configuration and in data source configuration window click Load settings:
  
  MysqlDSN
  
  ZappySys JDBC Bridge Driver - Configuration [Version: 2.0.1.10418]
  
  ZappySys JDBC Bridge Driver - MySQL
  
  Read and write MySQL data effortlessly. Query, sync, and manage databases and tables — almost no coding required.
  
  MysqlDSN
- Once a window opens, just paste the settings by pressing CTRL+V or by clicking right mouse button and then Paste option.
Once done, go to the Network Settings tab and Add a firewall rule for inbound traffic:
- This will initially allow all inbound traffic.
- Click Edit IP filters to restrict access to specific IP addresses or ranges.
Crucial Step: After creating or modifying the data source, you must:
- Click the Save button to persist your changes.
- Hit Yes when prompted to restart the Data Gateway service.
This ensures all changes are properly applied:

Skipping this step may cause the new settings to fail, preventing you from connecting to the data source.

Create ODBC data source to connect to the gateway

In this part we will create an ODBC data source to connect to the ZappySys Data Gateway from Alteryx. To achieve that, let's perform these steps:

Search for odbc and open the ODBC Data Sources (64-bit):
Create a User data source (User DSN) based on the ODBC Driver 17 for SQL Server driver:

ODBC Driver 17 for SQL Server

If you don't see the ODBC Driver 17 for SQL Server driver in the list, choose a similar version.
Then set a Name for the data source (e.g. Gateway) and the address of the Data Gateway:

ZappySysGatewayDSN

localhost,5000

Make sure you separate the hostname and port with a comma, e.g. localhost,5000.
Proceed with the authentication part:
- Select SQL Server authentication
- In the Login ID field enter the user name you created in the Data Gateway, e.g., john
- Set Password to the one you configured in the Data Gateway
Then set the default database property to MysqlDSN (the one we used in the Data Gateway):

MysqlDSN

MysqlDSN

Make sure to type the data source name manually or copy/paste it directly into the field. Using the dropdown might fail because the Trust server certificate option is not enabled yet (next step).
Continue by checking the Trust server certificate option:
Once you do that, test the connection:
If the connection is successful, everything is good:
Done!

We are ready to move to the final step. Let's do it!

Access data in Alteryx via the gateway

Finally, we are ready to read data from MySQL in Alteryx via the Data Gateway. Follow these final steps:

Go back to Alteryx.
Drag an Input Data tool onto your Alteryx canvas.
In the Configuration pane, click Set Up a Connection.
Note for DCM Users: If your environment has DCM (Data Connection Manager) enabled, the classic "Generic ODBC" icon may be hidden. To find it, select Data sources on the left and type "ODBC" in the search bar.
Once the ODBC window opens, click Connect Asset and select your ZappySysGatewayDSN DSN from the list.

Ensure you have configured a 64-bit System DSN in the Windows ODBC Data Source Administrator before this step.
Read the data the same way we discussed at the beginning of this article.
That's it!

Now you can connect to MySQL data in Alteryx via the Data Gateway.

If you are asked for authentication details, use Database authentication, SQL authentication or Basic authentication option and enter the credentials you used when configuring the Data Gateway, e.g. john and your password.

Troubleshooters & resources (JDBC Bridge Driver)

Below are some useful community articles to help you troubleshoot and configure the ZappySys JDBC Bridge Driver:

How to combine multiple JAR files
Learn how to merge multiple .jar dependencies when your JDBC driver requires more than one file.
How to fix JBR error: “Data lake is not available / Unable to verify trust for server certificate chain”
Resolve SSL or certificate validation issues encountered during JDBC connections.
System Exception: “Java is not installed or not accessible”
Fix Java path or environment issues that prevent the JDBC Bridge from launching Java.
JDBC Bridge Driver disconnect from Java host error
Troubleshoot unexpected disconnection problems between SSIS and the Java process.
Error: Could not open jvm.cfg while using JDBC Bridge Driver
Resolve JVM configuration path errors during driver initialization.
How to enable JDBC Bridge Driver logging
Enable detailed driver logging for better visibility during troubleshooting.
How to pass JDBC connection parameters (not by URL)
Learn how to specify connection properties programmatically instead of embedding them in the JDBC URL.
How to fix JDBC Bridge error: “No connection could be made because the target machine actively refused it”
Troubleshoot firewall or local port binding issues preventing communication with the Java host.
How to use JDBC Bridge options (System Property for Java command line, e.g., classpath, proxy)
Configure custom Java options like classpath and proxy using JDBC Bridge system properties.

Conclusion

In this article we showed you how to connect to MySQL in Alteryx and integrate data without writing complex code — all of this was powered by MySQL ODBC Driver. It's worth noting that ZappySys JDBC Bridge Driver allows you to connect not only to MySQL, but to any Java application that supports JDBC (just use a different JDBC driver and configure it appropriately).

Download ODBC PowerPack now or ping us via chat if you have any questions or are looking for a specific feature (you can also reach out to us by submitting a ticket):

Download Chat